Home » Posts tagged 'garage floors'

Tag Archives: garage floors

Common Garage Door Repairs

Garage Door Repair Tuttle requires a range of skills and knowledge. It is important to vet repair companies carefully and look for a company with experience in the industry.

Garage Door

If your garage door isn’t opening and closing properly, a quick fix might be as simple as replacing the batteries in your remote or ensuring that it is on the right frequency.

If you notice a dent or crack in one of your garage door panels, it’s time for a repair. Depending on the extent of the damage, you might be able to repair it by simply straightening out the panel or replacing it completely. Replacing your garage door panels is important to keep the structure intact and ensure that your home’s safety features are functioning properly.

Regardless of the severity of the damage, you should always have the issue addressed quickly. Failing to do so could result in further issues and escalate the costs of repairs. It may also put your family and pets at risk.

Some common causes of damage to garage doors include auto accidents, sports balls, and natural disasters. Moreover, constant exposure to sunlight and the rigours of weathering can cause warping or cracking to the panels. These effects may be difficult to spot and might only become noticeable when you open or close your garage door.

Before you decide whether to repair or replace the damaged panel, consider its location. If the damage is near a hinge or other crucial parts of the door, you’ll likely be looking at more extensive repairs or even replacements.

You should also consider the age of your garage door and if the damage is cosmetic only. Newer, well-maintained garage doors can often get away with replacing a single panel instead of the entire structure. Lastly, be sure to take measurements of the existing panel and the replacement before buying any materials. This will help you choose the right size for the replacement. In addition, it will help you make the best decision when deciding between DIY or professional repair.

Broken Cables

Broken cables are an incredibly common issue with garage doors. They are essential for lifting and lowering the heavy door, but can easily wear out with frequent use. Like most other moving parts, they require lubrication to reduce friction and prolong their lifespan. If the garage door jerks or stalls during operation, this can be an indication that the cables are worn out and need a professional adjustment or replacement.

If you suspect your garage door cable is broken, the first thing to do is secure it in the open position using a pair of locking pliers or a C-clamp. This will prevent the door from rolling down unexpectedly, which could cause serious injury or damage to your home. Once the door is secured, you can remove the old cable and replace it with a new one. To do so, start by locating the pin that holds the end of the cable on the bottom door drum. It’s often located along the outer edge of the drum and resting in a notch in the metal drum. Then, locate the end of the cable that is still attached to the opener and unwind it until you’re able to remove the other end from the pin.

Next, carefully feed the new cable through the pulleys and rollers. Be sure to match the length of the new cable with the old one, and follow any instructions provided by your manufacturer. Once the new cable is in place, test the door’s movement to ensure everything is working properly. If you notice any further signs of wear, such as a squeaking noise during movement, call a professional for repair.

Broken Rollers

While a door’s rollers may seem like a small part of the system, they play a big role in allowing it to operate smoothly. Because of this, it’s important to check them frequently for signs of wear and tear. If you notice excessive squeaking, grinding, or jamming, that’s an indication that it’s time to replace them. Continuing to use them can put additional stress on other parts of the system and lead to even bigger problems down the road.

Replacing a garage door roller is a do-it-yourself project that requires some basic tools and safety precautions. However, if you’re not comfortable with the process or don’t have the right tools on hand, it’s best to call a professional. A trained technician can perform the job safely and efficiently, as well as inspect the entire system for other issues.

Before you start working on a broken roller, make sure the power to your garage door is completely off by turning off the breaker or fuse in your home’s electrical panel. Next, you’ll need locking pliers or the claw end of a hammer to bend out a section of one side of your garage track. This will create a gap that you can then use to remove and replace the old roller.

Be careful not to bend out too much of the track, as doing so could cause the entire system to collapse. Once you’ve removed the damaged roller, you can then insert a new nylon roller and push it into place. Repeat this process with the other rollers until your entire track is complete and your garage door can operate smoothly again. Be sure to lubricate all moving parts of the system once you’re done.

Broken Springs

The springs in a garage door are crucial for the door to function properly, and they store a tremendous amount of tension. When they break, it can be extremely dangerous, especially if the garage door is fully open. A broken spring can fly loose and cause serious injuries or damage, so it’s important to call a professional right away.

A Squeaking Noise: If a garage door makes a squeaking sound, it’s a sign that the springs are starting to wear out and require replacement. During the replacement process, a technician will use a wire brush to remove any excess rust and apply a special lubricant designed for metal parts to increase their lifespan.

Homeowners can also inspect their extension springs for signs of wear and tear, such as a deteriorating coating or an obvious gap between the two ends. When reinstalling new springs, it’s important to ensure that both are equal in size and strength for balanced operation. Lastly, homeowners should consider purchasing double-life springs, which are stronger and last longer than standard springs.

When replacing old springs, homeowners should carefully follow the manufacturer’s instructions for a safe and accurate install. They should also make sure they’re securing the torsion tube properly using locking pliers, which will prevent movement during spring unwinding. Finally, they should verify that the new springs are the correct length for their specific door system. Once the new springs are installed, homeowners should test them for proper balance and secure them to avoid tripping hazards. Also, don’t forget to replace the other worn or rusted components while removing the old ones. For instance, a frayed cable should be replaced before installing the new springs to ensure that everything’s working correctly when the door is in motion.

Damaged Tracks

A garage door’s tracks are responsible for carrying the weight of heavy panels, and as such, they can experience a fair amount of wear and tear. A damaged track can be a major problem that can affect the smooth operation of your garage door. Fortunately, replacing your tracks is an easily manageable task, as long as you have the right knowledge and tools.

The first step in identifying your tracks’ condition is to look for obvious signs of damage, such as dents and gaps. You should also look for any areas that are bent or misaligned. If you notice any of these issues, it’s important to get them repaired as soon as possible, as they can lead to the door getting stuck or falling off of the tracks completely.

Another common sign of a damaged track is the presence of loud, grinding noises during the opening and closing of your garage door. This can be a sign that there is debris or dirt stuck in the tracks, which can cause them to rub against each other or degrade over time. It’s important to clean your garage doors regularly to prevent dirt and debris from building up in the tracks.

Once you have identified the affected section of your tracks, the next step is to loosen the hardware and begin straightening the track. This should be done carefully, as applying too much pressure to a bent track could result in it breaking. Once the track is straightened, it’s a good idea to test its alignment using a level to ensure that it is properly aligned and stable. Finally, you can tighten the hardware that you loosened and reroute any cables around the restored track if needed.